Power analyzer   Power analyzer 
High Performance Power Analyzer - Model 2503AH
   Portable Power Analyzer - Model 2551 (Single Phase) & 2553 (Three Phase)

 
Features:
  • 18 Bit, 500 KHz sampling speed provides 0.05% basic accuracy
  • 1200 Volts RMS, 40 Amp RMS, internal shunt, 100 Amp RMS Hall Effect CT’s and Bypass inputs for external transducers or current clamps.
  • Independent channel control and• unparallel flexibility and speed have made the 2503AH the instrument of choice for power analysis.
  • Pre-configured for ballast, motor, power supply and appliance tests.

    • Features:
  • A 200 ms to 10- Day historical data logging feature.
  • Built-in power supply for Hall Effect
  • transducer applications.
  • 6-key front panel has four soft keys with toggle menus.
  • Output is graphically displayed in waveforms, bar graphs, numerically and can be sent directly to a printer or to a PC

    		•
    Description:
    Measures power, voltage, current and frequency up to 500 KHz with utmost precision.
    Description:
    The Model 2551/2553 Power Analyzer provides the ideal combination of precision, speed and ease of use in an instrument so economical it can be on every bench. It measures power, frequency, harmonics, in-rush and captures glitches.


    Ballest Test Systems
    High Performance Power Analyzer - Model 2503AH

    Features:
  • Displays all relevant ballast measurements on a single screen.
  • Can completely test a ballast in significantly under one second.
  • Fully automatic ballast start-up and tube striking detection and data logging. Results may be obtained either graphically (via front panel or printout) or numerically (via IEEE488 or RS 232 interface) with down to 1 ms time resolution.
  • IEEE488 or RS 232 control of up to 4 external AC sources. Allows single user interface.
  • High-speed operation with ballast input measured in 1/2 cycle periods; ballast outputs measured in 512 us periods.
  • Wide bandwidth, ballast output frequencies of up to 2 MHz can be accurately measured.
  • Every signal is monitored continuously with 12 bit 21 MHz sampling.
  • Built-in printer interface enables a comprehensive test report to be printed in a semi-automatic test environment, or for recording results in an engineering environment.
  • Automatic test sequencing and complete comparison of measurements against limits, including the selection of different 1500 series load modules and engagement of 1500 series line switch modules. No computer or user software required.

    Description:
    Xitron Ballast Analyzers have the speed and versatility to completely change the way ballasts and tubes are being tested.


    • Phase Angle Multimeters   Phase Angle Multimeters
    6000 Phase Angle Multimeter
    		   6010 Phase Angle Mulitimeter

    		 
    Features:
  • Wide Bandwidth (0.1 Hz t0 100KHz).
  • 0.05 % Basic Amplitude Accuracy.
  • 0.05 Degree Phase Accuracy.

    • Features:
  • Wide Bandwidth 10-10KHz
  • 0.2% Amplitude Accuracy
  • Full +/-180 deg range with 0.5 deg accuracy
  • Total RMS, In Phase, Quadrature and Frequency are Measured.
  • RMS Level or Ratio Displays
  • Full 20mV to 15V Input Range on Both inputs

    • Description:
    The 6000 Series Multimeters use the latest DSP Technology to deliver true accuracy, versatility and portability without the cost and reliability burdens of older technologies.
    Description:
    Digital Signal Processing Technology delivers the flexibility you've always wanted in a Phase Angle Voltmeter. Full portability is not limited by the optional IEEE488, RS232 or Analog Outputs. Impressive accuracy (0.2% amplitude, 0.5 deg phase) and bandwidth (10Hz to 10KHz), coupled with being extremely easy to use, make this a MUST for discerning field service and production engineers.



    Calibration Equipment
    Portable D.C. Calibration Equipment- Model 2000, 2000I, 2000GS and 2000M
     

    Features:
  • Fully Bi-polar DC Voltage and Current Capability; 22 Volt, 10 ppm accuracy, 22mA, 40 ppm accuracy. .
  • Temperature Simulation with 0.01 degree resolution, 0.03 – 0.06 degree accuracy.
  • Temperature Measurement with 0.1 – 0.2 degree accuracy.
  • Auto cold junction compensation. Battery/line operation.

    • Description:
    The 2000 Family of calibrators provide unparalleled performance and flexibility in a portable, battery-powered instrument.