Programmable Calibrators   Programmable Calibrators 
5012 Programmable Switch - 24 Way   5022 30ppm Programmable Multi-Function Calibrator

   
Features:
  • 24 Switches with LED Display
  • 2 Pole Changeover
  • IEEE/GPIB/IEC/HPIB
  • Local and Remote operation
  • Self – test feature
    • Features:
  • 0-1kV AC/DC voltage
  • 0-10A AC/DC current
  • 10 ohm - 10M ohm resistance
  • Offset and deviation facilities
  • Self-test and error detection
  • Six wave forms from 15 Hz to 20 KHz in 5 Hz steps
  • Autocal facility
  • Safe high voltage operation
  • Easy recalibration

    • Programmable Calibrators    Programmable Calibrators 
    5025 15ppm Multi-Function Calibrator   5033 20ppm Programmable Precision DC Power Source - 3 Channel

    		 
    Features:
  • 0 - 1kV AC/DC Voltage
  • 0 - 20A AC/DC Current
  • 1R - 100MR Resistance
  • 1nF - 100uF Capacitance
  • 1mH - 10H Inductance
  • 0.1Hz - 100MHz Frequency
  • Active Resistance/Conductance
  • Thermocouple/PRT calibration
  • 1999999 f.s. + 10% over-range
  • 15ppm accuracy
  • GPIB and RS232 interface
  • Shuttle knob deviation
  • EasyCal calibration software compatible
    • Features:
  • 3 Channel Power Source
  • 0-20V DC
  • 2A
  • 22-bit settable resolution
  • Programmable via GPIB (IEEE488) interface
  • Easy to use SCPI-compatible command language
  • Rack-mount
  • Front-panel LEDs show status of each channel
  • Current readback (18 bits)
  • 40 watts per channel
  • Stability: <5ppm/24 hours, <10ppm/month), <20ppm/year at full load
  • Noise <1ppm
  • Temperature Coefficient < 1ppm/°C
  • 4 wire output
  • Compatible with EasyCal control software
  • Automatic power setting resolution
    		•

    Programmable Calibrators    Programmable Calibrators 
    5041 Oscilloscope & Timer/Counter Calibrator for use with ext. PC   5051 25 ppm Multi-Product Calibrator
     
    Features:
  • Suitable for oscilloscopes and timer/counters to 1GHz
  • Amplitude calibration: 1mV/Div to 50V/Div (graticule heights of 2, 4, 6, or 8)
  • Period calibration: 10ns to 15s
  • Fast Rise: Less than 300ps (for bandwidth checking to 1GHz)
  • Mark/Space ratio: 0.001% to 99.999%
  • Display: 16 character high brightness led, shows function/setting/errors
  • Optional 1GHz Levilised sweep
  • Optional Rubidium frequency reference
  • Optional GPS conditioned Rubidium freq reference
  • Programmable: RS232 (serial) and GPIB (IEEE488) interfaces. Full command-set allows complete control of all functions by an external computer
  • Included Software: Windows based application allows full control from an external PC without programming - download a demo of the PC Control Application now (see below).
    The 5041 is also fully compatible with the Time Electronics EasyCal software.

    		•
    Features:
  • 0 - 1kV AC/DC
  • 0 - 20A AC/DC
  • 15ppm accuracy
  • 1R - 100MR Resistance
  • 1nF - 100uF Capacitance
  • 1mH - 10H Inductance
  • 0.1Hz - 100MHz Frequency
  • 6.5 digit DMM function
  • Active Resistance/Conductance
  • Thermocouple/PRT calibration
  • Oscilloscope Calibration option
  • EasyCal calibration software included
  • Inkjet printer
  • 6 USB connectors

    • Programmable Calibrators    Programmable Calibrators 
    5075 Precision 7 Digits Digital Multimeter   9811 Programmable Resistance (1Ohm-1Mohm) 0.01% Accuracy
     
    Features:
  • 7 digit resolution
  • AC voltages from 3mV (resol: 100nV) to 3kV
  • DC voltages from 3mV (resol: 10nV) to 10kV
  • AC and DC currents from 3uA to 30A
  • Resistance 30mOhm (resol: 10nOhm) to 1GOhm
  • Capacitance 30nF to 300uF
  • Frequency 1Hz to 100kHz
  • PT100 -200degC to 600degC
  • Scanner 10 or 20 channels
  • 18ppm per year accuracy
    		•
    Features:
  • 1 ohm to 1M ohm
  • 0.01% mid-range accuracy
  • 1 ohm resolution
  • GPIB / RS232
  • Remote and local operation
  • Rack-mount

    • Programmable Calibrators    Programmable Calibrators 
    9814 Programmable D.C. Voltage Calibrator 0.01% Accuracy   9815 Programmable Screwdriver

    Features:
  • 10mV to 10V DC
  • 100V & 1kV optional ranges
  • 0.01% accuracy
  • 30% overrange on all ranges
  • IEEE/GPIB/IEC/HPIB
    • Features:
  • Automatic adjustment of Multi-turn Trimmers
  • 3-speed Forward and Reverse
  • GPIB Interface – Manual Control
  • High and Low Torque
  • Fast Stop

    • Programmable Calibrators    Programmable Calibrators 
    9818 Programmable D.C. Current and Voltage Calibrator 0.01% Accuracy   9819/9820 Programmable Resistance Low Ohm 0.01% Accuracy (0.01Ohm - 10kOhm)
    Features:
  • 5 current ranges from 100 uA to 1A
  • 4 voltage ranges from 10mV to 10V
  • 0.01% accuracy
  • 30% overrange on all ranges
  • IEEE/GPIB
    • Features:
  • 0.01 ohm to 10k ohm - 9819
  • 0.1 ohm to 100k ohm - 9820
  • 0.01% accuracy
  • Platinum resistance thermometer simulation
  • GPIB / RS232
  • Rack-mount

    • Programmable Calibrators    Programmable Calibrators 
    9823 10ppm Programmable Multi Function Calibrator   9722 30ppm Low-cost Calibration System based around the 5022 Programmable Multifunction Calibrator
    Features:
  • 0-1kV AC/DC voltage
  • 0-10A AC/DC current
  • 10 ohm - 10M ohm resistance
  • 10ppm per year accuracy
  • GPIB Interface
  • Compatible with EasyCal 5 Software
    		•
    Features:
  • 0-1000V AC/DC, 0-10 amp AC/DC
  • 10 - 10M ohms resistance
  • 6 waveforms from 15Hz to 20KHz
  • Handheld and bench DMM's up to 5 1/2 digits
  • RLC and clamp meters
  • Voltage/current sources, resistance boxes - requires 5075 DMM
  • Temperature indicators
  • Oscilloscopes
  • GPIB interface